NKO Cutting Tool Hard-Cut

Ceramic Fiber Stone

Abrasive Cutting Tools Kebutuhan Mold Maker & Dies

 

 Application
Cristone stands for Crystal Stone made from using the highest quality, chemically produced crystal fibers. The crystalline structure of the crystal fibers Offers high polishing efficiency and incredible bending strengch. These are the perfect stones for detail polishing. Extremely strong for tight ribs and slots, excellent for EDM removal.

High Strength
The highest bending strength 1300MP

 High Polishing
 2 times polishing efficiency of Ceramic stones! (can save 50H in EDM scale removal times)

High Surface
 Optimal crystalline structure for polishing
(can save 50H cutting time to reach Ra = 0.4g)

Grit Size & Order No.
	T x W x L	#150	#200	#400	#600	#800	#1000
	1 x 2 x 100	JRG-0102100	JRP-0102100	JRV-0102100	JRO-0102100	JRB-0102100	JRW-0102100
	1 x 4 x 100	JRG-0104100	JRP-0104100	JRV-0104100	JRO-0104100	JRB-0104100	JRW-0104100
	1 x 6 x 100	JRG-0106100	JRP-0106100	JRV-0106100	JRO-0106100	JRB-0106100	JRW-0106100
	1 x 10 x 100	JRG-0110100	JRP-0110100	JRV-0110100	JRO-0110100	JRB-0110100	JRW-0110100
	1 x 13 x 100	JRG-0113100	JRP-0113100	JRV-0113100	JRO-0113100	JRB-0113100	JRW-0113100
	ø3 x 100	JRG-03100	JRP-03100	JRV-03100	JRO-03100	JRB-03100	JRW-03100
	ø2.35 x 100	JRG-0235100	JRP-0235100	JRV-0235100	JRO-0235100	JRB-0235100	JRW-0235100

 Resin Bond Wheels
 
Wheels smaller than 1/8" (3.2mm) and up to 30" (762mm) are produced at our facilities. From the simplest 1A1 type wheel to the most complex-shaped wheel, General has the capability and the range of tooling to meet customers' needs.




Vitrified Wheels
 
Vitrified Bond Diamond & CBN Wheels are suitable for special Carbide, Ceramic grinding applications and PCD & PCBN products.
 
  Electroplated Wheels
 We supply all kinds of Diamond & CBN electroplated wheels, blades

SUPERABRASIVE WHEEL
SPECIFICATIONS
 
 Recommended Applications

DIA Material recommended for cutting with PCD:	CBN(Cubic boron nitride) Material recommended for cutting with CBN:
Aluminum and aluminum alloys	Alloy tool steel (45-68RC)
Copper, brass and bronze alloys	Carbon tool steel (45-68RC)
Zinc and magnesium alloys	Die steel (45-68RC)
Gold and Silver	High Speed steel (45-68RC)
Tungsten carbide, presintered and sintered	Chilled cast iron
Carbon and graphite	Ni Hard
Ceramics, unfired	Forged steel
Epoxy resins	Meehanite iron
Plastics and rubber	Inconel 600
Fiberglass composites	Incoloy
Graphite composites	Stellite
Phenolics
Chipboard and fiberboard
Oxide Ceramic materials
Refractory Products

SUPERABRASIVES WHEEL SHAPES

 STANDARD WHEEL CONFIGURATION

 



MULTI POINT DIAMOND DRESSERS 
 

Application
For surface dressing of Aluminum oxide grinding wheels, like PA, WA, GA...whells.

Diamond Quality	Shank	Diamond Distribution	Order No.
3	Ø12 x 100   L		DDM-03101
3	Ø12 x 100L		DDM-03102
5	Ø12 x 100L		DDM-05101
6	Ø12 x 100L		DDM-06101
7	Ø12 x 100L		DDM-07101

SINGLE DIAMOND DRESSERS
 
Application
Material (Shank) : SK4 Tip : Natural Diamond

Dia.    Wt. Code	Approx.     Wt.(cts)	Grinding    Wheels Size  (mm)	Order No.	Shank
#2	0.10 cts	Ø150 x 25 or smaller	DDS-010	Ø10 x 80L (A) Ø12 x 100L (B)
#3	0.12 cts		DDS-012
#4	0.15 cts		DDS-015
#5	0.18 cts		DDS-018
#10	0.20 cts		DDS-020
#15	0.25 cts	Ø150 ~ Ø300 x 25	DDS-025
#20	0.35 cts		DDS-035
#25	0.50 cts		DDS-050
#33	0.75 cts		DDS-075
#50	1.0 cts	Ø300 ~ Ø450 x 25 ~ 40	DDS-100
#75	1.5 cts	Ø450 ~ Ø600 x 50 ~ 100	DDS-150
#100	2.0 cts	Ø600 or larger	DDS-200

Oder Ex. : DDS-020-A(or B)

Installation and opration

 




 CONED DIAMOND DRESSERS
 

 Pumch former, angle dresser, duplex dresser and angle sine dresser...                                                   

Material (Shank) : SK4
Tip : Natural Diamond Sharpening

For precision Dressing of Aluminum oxide grinding wheels, like PA, WA, GA...wheels.
It is perfect to use together with following equipments.

Diameter	Length	Order No.
3.175	25.4	DDC-001
3.175	50	DDC-002
6.35	50	DDC-003
9.53	50	DDC-004
10	50	DDC-005

  PYRAMID DRESSERS
 
Application

Material (Shank) : SK4
Tip : Natural Diamond Sharpening

For precision dressing of internal grinding wheels.

D	L	Order No  .
Ø10	50	DDP-001
Ø12	50L / 100L	DDP-002
Ø6	22L	DDP-003
Ø8	23L	DDP-004

IMPREGNATED DIAMOND DRESSERS
 

Type(Shank)	Shank	Applications	Diamond Tips	Grit	Order No.
	Ø12 x 100 Ø12 x 50	For centerless, cylindrical, surface grinding. Wheel size : Ø300 x 25 ~ Ø500 x 63	2A	F	DDI-2AFC
				M	DDI-2AMC
				R	DDI-2ARC
	Ø12 x 50			F	DDI-2AFD
				M	DDI-2AMD
				R	DDI-2ARD
	Ø10 x 50 Ø12 x 50	For general purpose grinding. Wheel size : Ø300 and smaller	1C	F	DDI-1CFG
				M	DDI-1CMG
				R	DDI-1CRG

HAND DIAMOND DRESSERS

Form	Diamond Tips	Grit Size	Order No.
Total length: 160mm	2A	R	DDH-01R DDH-01F
		F
Total length: 200mm	1A	R	DDH-02R DDH-02F
		F

Grit Instruction
Diamond Grit		Grinding wheel grit   in  operation
Coarse	#16/20 + #20/30	#60 HU (more coarse)
Medium	#30/50	#80 ~ #120
Fine	#50/80	#150 HW (more fine)

TDF-130 TAPERED DIAMOND FILE

 

Shape	L	B	W	T	Shank	Grit	Order No.
A	130	30	2	0.4 ~ 1.7	Ø3	#200	TDF-130A-200
						#400	TDF-130A-400
						#600	TDF-130A-600
B			4			#200	TDF-130B-200
						#400	TDF-130B-400
						#600	TDF-130B-600
C			6			#200	TDF-130C-200
						#400	TDF-130C-400
						#600	TDF-130C-600
D	140	50	3	-		#400	TDF-130D-400
10 Pieces / Set							TDF-130S

TDF-170 TAPERED DIAMOND  FILE

Application

Shape L B W T Shank Grit Order No. A 170 50 2 0.4 ~ 1.5 2 x 1.5 #120 TDF-170A-120 #200 TDF-170A-200 #400 TDF-170A-400 B 4 0.5 ~ 2.0 4 x 2.0 #120 TDF-170B-120 #200 TDF-170B-200 #400 TDF-170B-400 C 6 0.5 ~ 2.0 6 x 2.0 #120 TDF-170C-120 #200 TDF-170C-200 #400 TDF-170C-400 D 8 0.5 ~ 2.5 8 x 2.5 #120 TDF-170D-120 #200 TDF-170D-200 #400 TDF-170D-400 12 Pieces / Set TDF-170S

 FDF-140 FLAT DIAMOND FILES

 
 

Shape	L	B	W	T	Shank	Grit	Order No.
A	140	40	5.5	0.5	Ø3	#120      #200 #400	FDF-140A-(Grit)
B		50		0.8			FDF-140B-(Grit)
C		50		1.0			FDF-140C-(Grit)
D		50		1.2			FDF-140D-(Grit)
4 Pieces / Set							FDF-140S-(Grit)

 NDF-140 NEEDLE DIAMOND FILES

 

Shape	L	B	W	T	Shank	Grit	Order No.
A	140	50	5.5	1.6	Ø3	#120 #200 #400	NDF-140A-(Grit)
B			5	2			NDF-140B-(Grit)
C			3	3			NDF-140C-(Grit)
D			3.5	3.5			NDF-140D-(Grit)
E			2.5	2.5			NDF-140E-(Grit)
F			5.2	1.6			NDF-140F-(Grit)
G			5.5	1.3			NDF-140G-(Grit)
H			6	1.5			NDF-140H-(Grit)
I			5	2			NDF-140I-(Grit)
J			5	2.2			NDF-140J-(Grit)
10 Pieces / Set							NDF-140S-(Grit)

 NDF-180 NEEDLE DIAMOND FILES


 

Shape	L	B	W	T	Shank	Grit	Order No.
A	180	70	7.5	1.5	Ø3.5	#120   #200	NDF-180A-(Grit)
B			6	2.1			NDF-180B-(Grit)
C			3.5	3.5			NDF-180C-(Grit)
D			4	4			NDF-180D-(Grit)
E			3.4	3.4			NDF-180E-(Grit)
5 Pieces / Set							NDF-180S-(Grit)

 NDF-200 NEEDLE DIAMOND FILES


 

Shape	L	B	W	T	Shank	Grit	Order No.
A	200	80	8.5	1.6	Ø4	#120     #200	NDF-200A-(Grit)
B			7	2.5			NDF-200B-(Grit)
C			4	4			NDF-200C-(Grit)
D			5	5			NDF-200D-(Grit)
E			3.5	3.5			NDF-200E-(Grit)
5 Pieces / Set							NDF-200S-(Grit)

MTDF-80 MACHINE TAPER
DIAMOND FILES FOR EQUIPMENTSR
Related Tools
Air Profiler-linear   
  XH-22 HOLDER
 Ultrasonic Polisher

Shape	L	B	W	T	Shank	Grit	Order No.
A	80	25	3	0.5 ~ 1.4	Ø3	#120	MTDF-80A-120
						#200	MTDF-80A-200
						#400	MTDF-80A-400
						#600	MTDF-80A-600
B			4			#120	MTDF-80B-120
						#200	MTDF-80B-200
						#400	MTDF-80B-400
						#600	MTDF-80B-600
C			6			#120	MTDF-80C-120
						#200	MTDF-80C-200
						#400	MTDF-80C-400
						#600	MTDF-80C-600
12 Pieces / Set							MTDF-80S

MTDF-FA MACHINE TAPER
DIAMOND FLEXIBLE FILES 
Related Tools
 Air Profiler-linear 
  XH-22 HOLDER
 Ultrasonic Polisher
 

Shape	L	B	W	T	Grit	Order No.
A	60	25	2 ~ 4	0.5~1.0	#150 #200 #400 #600	MTDF-FAA-(Grit)
B			4			MTDF-FAB-(Grit)
C	70	40	6			MTDF-FAC-(Grit)
D			8			MTDF-FAD-(Grit)
E			10			MTDF-FAE-(Grit)

HDDF-215 HEAVY DUTY DIAMOND FILES 

 

Shape	L	B	W	T	Shank	Grit	Order No.
A	215	80	11	3.5	10.5 X 3	#100	HDDF-215A-100
B			10.5	4.4	10.5 X 3		HDDF-215B-100
C			5	5	5 X 5		HDDF-215C-100
D			7.7	7.7	10.5 X 3		HDDF-215D-100
E			6.3	6.3	5 X 5		HDDF-215E-100
5 Pieces / Set							HDDF-215S-100

 RDFA-140 RADIAN DIAMOND FILES

 

Shape	L	B	W	T	Shank	Grit	Order No.
A	140	30	6	1.5	Ø3	#150 #200 #400	RDFA-140A-(Grit)
B			5	2			RDFA-140B-(Grit)
C			3.5	3.5			RDFA-140C-(Grit)
D			2.5	2.5			RDFA-140D-(Grit)
E			3	3			RDFA-140E-(Grit)
5 Pieces / Set							RDFA-140S-(Grit

RDFB-150 RADIAN DIAMOND FILES


 

Shape	L	B	W	T	Shank	Grit	Order No.
A	150	25	3	2	Ø3	#120 #200	RDFB-150A-(Grit)
B		25	2	2			RDFB-150B-(Grit)
C		20	2	2			RDFB-150C-(Grit)
D		25	3	3			RDFB-150D-(Grit)
E		20	2.5	2.5			RDFB-150E-(Grit)
5 Pieces / Set							RDFB-150S-(Grit)

 RDFC-150 RADIAN DIAMOND FILES

 

Shape	L	B	W	T	Shank	Grit	Order No.
A	150	20	5	1.2	Ø3	#120 #200 #400	RDFC-150A--(Grit)
B			2	2			RDFC-150B-(Grit)
C			4	2			RDFC-150C-(Grit)
D			3	3			RDFC-150D-(Grit)
E			2.5	2.5			RDFC-150E-(Grit)
F			3	1.2			RDFC-150F-(Grit)
G			2	2			RDFC-150G-(Grit)
H			6	1.2			RDFC-150H-(Grit)
I			5	1.6			RDFC-150I-(Grit)
J			3	1.2			RDFC-150J-(Grit)
10 Pieces / Set							RDFC-150S-(Grit)

MRDF-65 MACHINE RADIAN
DIAMOND FILES FOR EQUIPMENTS

 Air Profiler-linear 

  XH-22 HOLDER
 Ultrasonic Polisher

Shape     L       B        W        T        Shank       Grit          Order No. A 65 20 5.8 1.2 Ø3 #150 #200 MRDF-65A--(Grit) B 1.4 3.2 MRDF-65B-(Grit) C 5 2 MRDF-65C-(Grit) D 3.2 1.4 MRDF-65D-(Grit) E 3 3 MRDF-65E-(Grit) F 30 3 3 MRDF-65F-(Grit) G 20 3 3 MRDF-65G-(Grit) H 3.2 1.4 MRDF-65H-(Grit) I 3.2 1.4 MRDF-65I-(Grit) J 4 2 MRDF-65J-(Grit) 10 Pieces / Set MRDF-65S-(Grit)

PTDF-140
INTERNAL BORING DIAMOND FILES


 

OD	L	B	Grit	Order No.
1.0	140	80	#100	PTDF-140-10-100
1.1				PTDF-140-11-100
1.2				PTDF-140-12-100
1.3				PTDF-140-13-100
1.4				PTDF-140-14-100
1.5				PTDF-140-15-100

 PTDF-200
INTERNAL BORING DIAMOND FILESPTDF-140
INTERNAL BORING DIAMOND FILES

 

OD	L	B	Grit	Order No.
1.5 ~ 5.0	200	120	#100	PTDF-200-(15 ~ 50 )-100
5.1 ~ 6.0				PTDF-200-(51 ~ 60 )-100
6.1 ~ 7.0				PTDF-200-(61 ~ 70 )-100

 PTDF-250
INTERNAL BORING DIAMOND FILESPTDF-140
INTERNAL BORING DIAMOND FILES


 

OD	L	B	Grit	Order No.
7.1 ~ 8.0	250	120	#100	PTDF-250-(71 ~ 80 )-100
8.1 ~ 9.0				PTDF-250-(81 ~ 90 )-100
9.1 ~ 10.0				PTDF-250-(91~ 100 )-100

DIAMOND ELECTROPLATED
CUTTING BLADES
Related Tools

 Air GrinderABF-235SABF-300S






 

OD	U	E	T	H	Grit	Order No.
22	6.5	0.15	0.3	1.7	#400	BM-2215AV
22	2	0.15	0.3	1.7	#400	BM-2215DV
22	6.5	0.2	0.4	1.7	#200	BM-2220AF
22	2	0.2	0.4	1.7	#200	BM-2220DF
22	6.5	0.2	0.4	1.7	#200	BM-2220CF
22	6.5	0.2	0.5	1.7	#150	BM-2220AJ
22	2	0.2	0.5	1.7	#150	BM-2220DJ
22	6.5	0.4	0.7	1.7	#150	BM-2240AJ
25	8	0.2	0.4	1.7	#200	BM-2520AF
25	2	0.2	0.4	1.7	#200	BM-2520DF
25	8	0.2	0.5	1.7	#150	BM-2520AJ
25	2	0.2	0.5	1.7	#150	BM-2520DJ
25	8	0.4	0.7	1.7	#150	BM-2540AJ
25	8	0.4	0.8	1.7	#80	BM-2540AR
25	2	0.4	0.8	1.7	#80	BM-2540DR

Cylindrical Type - MA

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.










Round End Type - MB

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.



              


Round End Taper Type - MC

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.







Ball Type - MD

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.

OD 1.0~3.5 #150   OD 4.0~above #120
5pcs/set








Flat End Type - MF

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.







Needle End Taper Type - MG

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.






Needle End Type - MP

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.







Egg Type - MQ


Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.






Awl Type - MR

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.




Match Type - MS

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.







Flat T Type - MTT

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas.



OD 1.0~3.5 #150   OD 4.0~above #120
5pcs/set



Round T Type - MTR

Application
Miracle Diamond Burrs precisely manufactured from the highest quality diamond, they are excellent for hard to remove bits and detail areas







DIAMOND & CBN MANDRELS
(3mm Shank)

Note
Indicating standard stock available for grits to be marked in the above

 Order Ex.
MMD - 3010 - 140
(Model No. - Size - Grit)

 

D	T	N	L	B	DIA			CBN			Order No.
					Fine	Medium	Coarse	Fine	Medium	Coarse	DIA	CBN
0.3	2	3	35	3	400			400			MMD-3003	MMB-3003
0.4	2	3.5	35	3	400	200		400	200		MMD-3004	MMB-3004
0.5	2	3.5	35	3	325	200		325	200		MMD-3005	MMB-3005
0.6	2	6	35	3	200	140		200	140		MMD-3006	MMB-3006
0.7	2	7	35	3	200	140		200	140		MMD-3007	MMB-3007
0.8	3	7	35	3	200	140		200	140		MMD-3008	MMB-3008
0.9	3	7	35	3	200	140	100	200	140	100	MMD-3009	MMB-3009
1.0	3	7	45	3	200	140	100	200	140	100	MMD-3010	MMB-3010
1.1	3	7	45	3	200	140	100	200	140	100	MMD-3011	MMB-3011
1.2	3	12	45	3	200	140	100	200	140	100	MMD-3012	MMB-3012
1.3	3	12	45	3	200	140	100	200	140	100	MMD-3013	MMB-3013
1.4	3	12	45	3	200	140	100	200	140	100	MMD-3014	MMB-3014
1.5	3	13	45	3	200	140	100	200	140	100	MMD-3015	MMB-3015
1.6	4	13	45	3	200	140	100	200	140	100	MMD-3016	MMB-3016
1.7	4	13	45	3	200	140	100	200	140	100	MMD-3017	MMB-3017
1.8	4	13	45	3	200	140	100	200	140	100	MMD-3018	MMB-3018
1.9	4	13	45	3	200	140	100	200	140	100	MMD-3019	MMB-3019
2.0	4	13	45	3	200	140	100	200	140	100	MMD-3020	MMB-3020
2.0	5	20	45	3	200	140	100	200	140	100	MMD-3920	MMB-3920
2.1	4	13	45	3	200	140	100	200	140	100	MMD-3021	MMB-3021
2.2	4	13	45	3	200	140	100	200	140	100	MMD-3022	MMB-3022
2.3	4	13	45	3	200	140	100	200	140	100	MMD-3023	MMB-3023
2.4	4	13	45	3	200	140	100	200	140	100	MMD-3024	MMB-3024
2.5	4	13	45	3	200	140	100	200	140	100	MMD-3025	MMB-3025
2.5	5	25	45	3	200	140	100	200	140	100	MMD-3925	MMB-3925
2.6	4	13	45	3	200	140	100	200	140	100	MMD-3026	MMB-3026
2.7	4	13	45	3	200	140	100	200	140	100	MMD-3027	MMB-3027
2.8	4	13	45	3	200	140	100	200	140	100	MMD-3028	MMB-3028
2.9	4	13	45	3	200	140	100	200	140	100	MMD-3029	MMB-3029
3.0	5	13	45	3	200	140	100	200	140	100	MMD-3030	MMB-3030
3.0	5	25	45	3	200	140	100	200	140	100	MMD-3930	MMB-3930
3.5	5		45	3	200	140	100	200	140	100	MMD-3035	MMB-3035
4.0	5		45	3	200	140	100	200	140	100	MMD-3040	MMB-3040
4.5	5		45	3	200	140	100	200	140	100	MMD-3045	MMB-3045
5.0	8		45	3	200	140	100	200	140	100	MMD-3050	MMB-3050
6.0	8		45	3	200	140	100	200	140	100	MMD-3060	MMB-3060

DIAMOND & CBN MANDRELS
(6mm Shank)

Note
Indicating standard stock available for grits to be marked in the above

 Order Ex.
MMD - 3010 - 140
(Model No. - Size - Grit)

 

D	T	N	L	B	DIA		CBN		Order No.
					Medium	Coarse	Medium	Coarse	DIA	CBN
2.0	10	30	80	6	140	100	140	100	MMD-6020	MMB-6020
2.5	10	30	80	6	140	100	140	100	MMD-6025	MMB-6025
3.0	10	30	80	6	140	100	140	100	MMD-6030	MMB-6030
3.5	10	30	80	6	140	100	140	100	MMD-6035	MMB-6035
4.0	10	30	80	6	140	100	140	100	MMD-6040	MMB-6040
4.5	10	30	80	6	140	100	140	100	MMD-6045	MMB-6045
5.0	10	30	80	6	140	100	140	100	MMD-6050	MMB-6050
5.5	10	30	80	6	140	100	140	100	MMD-6055	MMB-6055
6.0	10	35	80	6	140	100	140	100	MMD-6060	MMB-6060
6.5	10		80	6	140	100	140	100	MMD-6065	MMB-6065
7.0	10		80	6	140	100	140	100	MMD-6070	MMB-6070
7.5	10		80	6	140	100	140	100	MMD-6075	MMB-6075
8.0	10		80	6	140	100	140	100	MMD-6080	MMB-6080
8.5	10		80	6	140	100	140	100	MMD-6085	MMB-6085
9.0	10		80	6	140	100	140	100	MMD-6090	MMB-6090
10.0	10		80	6	140	100	140	100	MMD-6100	MMB-6100
11.0	10		80	6	140	100	140	100	MMD-6110	MMB-6110
12.0	10		80	6	140	100	140	100	MMD-6120	MMB-6120
13.0	10		80	6	140	100	140	100	MMD-6130	MMB-6130
14.0	10		80	6	140	100	140	100	MMD-6140	MMB-6140
15.0	10		80	6	140	100	140	100	MMD-6150	MMB-6150
16.0	10		80	6	140	100	140	100	MMD-6160	MMB-6160
17.0	10		80	6	140	100	140	100	MMD-6170	MMB-6170
18.0	10		80	6	140	100	140	100	MMD-6180	MMB-6180
20.0	10		80	6	140	100	140	100	MMD-6200	MMB-6200
21.0	10		80	6	140	100	140	100	MMD-6210	MMB-6210
22.0	10		80	6	140	100	140	100	MMD-6220	MMB-6220
25.0	10		80	6	140	100	140	100	MMD-6250	MMB-6250

DIAMOND COMPOUND


 
Related Tools Felt Grinding Pins

Application
The diamond compounds is using for polishing all kinds of mold, ceramic, jewel and so forth operation.
We divide our quality into 2 levels. For normal jewel and mold makers, we suggest you using standard quality and for professional mold makers, the high quality will be satisfied with your target

# Grit	Package   (g)	Micron Range (g)	Function	High Quality	Standard
28000	5g	0.5	Mirrorlike Polishing	CMP-28000	KMP-28000
14000		1		CMP-14000	KMP-14000
8000		3	Fine Polishing	CMP-08000	KMP-08000
5000		4.5		CMP-05000	KMP-05000
3000		6		CMP-03000	KMP-03000
2000		8		CMP-02000	KMP-02000
1800		9		CMP-01800	KMP-01800
1500		13	Normal Polishing	CMP-01500	KMP-01500
1200		15		CMP-01200	KMP-01200
1000		17.5		CMP-01000	KMP-01000
800		25		CMP-00800	KMP-00800
600		35		CMP-00600	KMP-00600
400		50		CMP-00400	KMP-00400
200		90	Rough Polishing	CMP-00200	KMP-00200

FELT GRINDING PINS

Air Grinder
  ABF-300S
Diamond Compound

 Application
The Miracle Felt Grinding Pins use high quality Felt block made in Germany. This high intensive felt enables to keep the shape of materials and shining of steel without line marks.

D × T × H			25×3×1.7					25×5×1.7				75×12×9.5				150×10×12	205×10×16	255×10×25											255×15×25

Order No.	ABF-2503E	ABF-2505E	ABF-7512E	ABF-15010E	ABF-20510E	ABF-25510E	ABF-25515E

BRISTLE BRUSHES

 


CUPPER WIRE BRUSHES



HORSE BRISTLE BRUSHES



STAINLESS STEEL WIRE BRUSHES




WOOL BRUSHES




DIAMOND POLISHING STONES



Application
Diamond Polishing Stone is considered as final finish for cutting tools. It is used to refine a surface by removing scratch lines and other surface imperfections. Therefore prolong the tools life and smooth a surface finish. Also apply to lap the tungsten ceramics and hardened Steels

 Grit Size
#100, #200, #400, #600, #800, #1000, #1200, #1800, #2000, #3000, #5000

Dimensions W x (R) x X x W	Shank Material	Order No.
10x2x40	PLASTIC SHANK	DPS-01-(Grit)
5x2x40	STEEL SHANK	DPS-02-(Grit)
5x(2.5R)x4x40	STEEL SHANK	DPS-03-(Grit)
10x2x30	ALUMINUM SHANK	DPS-04-(Grit)

Dimensions W x (R) x X x W	Shank Material	Order No.
10x3x120	-	DPS-05-(Grit)
4x4x100	-	DPS-06-(Grit)
13x3x100	-	DPS-07-(Grit)
6x2x100	-	DPS-08-(Grit)

COW LEATHER & SPONGE ELASTIC
GRINDING PINS




COW LEATHER ELASTIC GRINDING PINS
Grit: #100
Application: For Metal Polishing

SPONGE ELASTIC GRINDING PINS
Grit: #120
Application: For Aluminum Alloy and Iron Polishing

OD x Thickness x Shank	Cow Leather Order No.	Sponge Elastic Order No.
3 x 12 x 3 mm	ABL-03123	ABR-03123
4 x 13 x 3 mm	ABL-04133	ABR-04133
5 x 16 x 3 mm	ABL-05163	ABR-05163
6 x 17 x 3 mm	ABL-06173	ABR-06173
8 x 20 x 3 mm	ABL-08203	ABR-08203
10 x 20 x 3 mm	ABL-10203	ABR-10203
13 x 20 x 3 mm	ABL-13203	ABR-13203
22 x 4 x 3 mm	ABL-22043	ABR-22043
13 x 20 x 6 mm	ABL-13206	ABR-13206
15 x 25 x 6 mm	ABL-15256	ABR-15256
20 x 25 x 6 mm	ABL-20256	ABR-20256
25 x 25 x 6 mm	ABL-25256	ABR-25256
38 x 10 x 6 mm	ABL-38106	ABR-38106

DAIWA RABIN (Made in Japen)







Type CM
A long-selling product. Sharp and excellent in polishing with its own elasticity. Characterized also by versatility applicable to aluminum die cast and stainless steel including molds.

Materials of work
General Steels, Aluminum alloy, Stainless steel, Iron based cast parts, forged parts, molds.

Available Abrasives	Grit Sizes	Standard          Bondings	Diameter      (D)	Length     (T)	Shank      Diameter (d)
WA	80 120                    180 220	CM55	4	13	3
			5	15	3
			6	17	3
		CM43	8	20	3
			10	20	3
			13	20	3
			15	** 17	3
			13	20	6
			15	20	6
			15	25	6
			20	25	6
			20	** 37	6
			25	25	6
			30	30	6

Order Ex. : ABR-WA 80 - 0413 - CM55 ( Model NO. Grit - Size - Bonding )
BONDING 4~6mm ....CM55 / OVER 8mm ....CM43



DIAMOND FOIL

 
Application
Diamond powders are fully sprayed on the surface of copper foil, this features in longer tool life. Fast cutting or polishing on hard steels of tungsten carbides, stones, glass and hard ceramics...etc.

Foil can also be glued to different sized tools and cut to size applied to flexible, adhesive back sheet.

Size	#120	#150	#200	#300	#400	#600	#800	#1200	#1800
10 x 100mm	DPC-1012	DPC-1015	DPC-1020	DPC-1030	DPC-1040	DPC-1060	DPC-1080	DPC-1120	DPC-1180
50 x 100mm	DPC-2012	DPC-2015	DPC-2020	DPC-2030	DPC-2040	DPC-2060	DPC-2080	DPC-2120	DPC-2180
100 x 100mm	DPC-3012	DPC-3015	DPC-3020	DPC-3030	DPC-3040	DPC-3060	DPC-3080	DPC-3120	DPC-3180

MICRO-POLIERLEINEN
(Made in Germany)





Application
MICRO-POLIERLEINEN designed for metallographic Applications to fine grind a wide variet of laboratory materials. It feature superior mineral grading, a unique resin top coat and a latex additive in the cloth. This combination resists water penetration, creating a durable, long-lasting polishing cloth. Its suitable for all kinds of material, like metal, wood, acrylic, plastic, glassKand so forth.

THE MICRO-POLIERLEINEN IS SUITABLE FOR ULTRA FINE FINISHING OF OPTICS, GAUGE AND PRECISION MACHINERY.

Grit	14 x 15 cm ( 3 pcs / set)	15 cm x 15.2 meters
#1500	SP-FLO-1415-1500	SP-FLO-15015-1500
#1800	SP-FLO-1415-1800	SP-FLO-15015-1800
#2400	SP-FLO-1415-2400	SP-FLO-15015-2400
#3200	SP-FLO-1415-3200	SP-FLO-15015-3200
#4000	SP-FLO-1415-4000	SP-FLO-15015-4000
#6000	SP-FLO-1415-6000	SP-FLO-15015-6000
#8000	SP-FLO-1415-8000	SP-FLO-15015-8000
#12000	SP-FLO-1415-12000	SP-FLO-15015-12000

ALUMINUM OXIDE GRINDING PINS

Application
Miracle Aluminum Oxide Grinding Ping made by PA abrasive. It is high efficiency long tool life makes your work effective.

Standard : 3mm Shanks
Options : 2.34mm / 3.175mm Shanks

 



Solid Carbide Cylinder Shape SA




Application
*d : double cut
*s : single cut
*nf : nonferrous

MODEL	Cutting Dia  d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm
SA-41M	1.5	3	6	38
SA-42M	2.5	3	11	38
SA-43M	3	3	14	38
SA-51M	6	3	12	50
SA-51M/EC	6	3	12	50
SA-52M	4	3	12.7	38
SA-53M	5	3	12.7	38
SA-13M	4	6	16	50
SA-14M	5	6	16	50
SA-1M	6	6	16	50
SA-2M	8	6	19	63
SA-3M	9.5	6	19	63
SA-5M	12.7	6	25	69
SA-6M	16	6	25	69
SA-7M	19	6	25	69
SA-9M	25	6	25	69

Solid Carbide Cylinder Shape SB/ EC





Application
*d : double cut
*s : single cut
*nf : nonferrous

MODEL	Cutting Dia       d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm
SB-43M	3	3	14	38
SB-51M	6.3	3	4.7	43
SB-13M	4	6	16	50
SB-14M	5	6	16	50
SB-1M	6	6	16	50
SB-2M	8	6	19	63
SB-3M	9.5	6	19	63
SB-5M	12.7	6	25	69
SB-6M	16	6	25	69
SB-7M	19	6	25	69
SB-9M	25	6	25	69

Solid Carbide Cylinder Shape Radius End SC






Application
*d : double cut
*s : single cut
*nf : nonferrous

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm
SC-41M	2.5	3	11	38
SC-42M	3	3	14	38
SC-51M	6.3	3	12.7	50
SC-52M	4	3	12.7	38
SC-53M	5	3	12.7	38
SC-13M	4	6	16	50
SC-14M	5	6	16	50
SC-1M	6	6	16	50
SC-2M	8	6	19	63
SC-3M	9.5	6	19	63
SC-5M	12.7	6	25	69
SC-6M	16	6	25	69
SC-7M	19	6	25	69
SC-9M	25	6	25	69

Solid Carbide Ball Shape SD

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm
SD-41M	2.5	3	2.3	38
SD-42M	3	3	2.8	38
SD-51M	6.3	3	5	44
SD-52M	4	3	3.4	38
SD-53M	5	3	4.7	38
SD-11M	3	6	2.8	50
SD-14M	5	6	4	50
SD-1M	6	6	5	50
SD-2M	8	6	6.4	50
SD-3M	9.5	6	8	52
SD-5M	12.7	6	11	55
SD-6M	16	6	14	58
SD-7M	19	6	16	62
SD-9M	25	6	21	72

Solid Carbide Oval Shape SE










Application
*d : double cut
*s : single cut
*nf : nonferrous

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm
SE-41M	3	3	5.5	38
SE-51M	6.3	3	9.5	47
SE-53M	5	3	7.1	38
SE-1M	6	6	9.5	50
SE-3M	9.5	6	16	60
SE-5M	12.7	6	22	66
SE-6M	16	6	25	69
SE-7M	19	6	25	69

Solid Carbide Tree Shape SF




Application
*d : double cut
*s : single cut
*nf : nonferrou

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm
SF-41M	3	3	6	38
SF-42M	3	3	12.7	38
SF-51M	6.3	3	12.7	56
SF-53M	5	3	12.7	38
SF-13M	12.7	6	19	63
SF-14M	19	6	32	76
SF-15M	19	6	38	82
SF-1M	6	6	16	50
SF-3M	9.5	6	19	63
SF-4M	11	6	25	69
SF-5M	12.7	6	25	69
SF-6M	16	6	25	69
SF-7M	19	6	25	69

Solid Carbide Tree Shape Pointed End SG





Application
*d : double cut
*s : single cut
*nf : nonferrous

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm
SG-41M	3	3	6	38
SG-43M	3	3	9.5	38
SG-44M	3	3	12.7	38
SG-51M	6.3	3	12.7	50
SG-53M	5	3	12.7	38
SG-1M	6	6	16	50
SG-2M	8	6	19	63
SG-3M	9.5	6	19	63
SG-5M	7	6	25	69
SG-6M	16	6	25	69
SG-7M	19	6	25	69
SG-15M	19	6	38	82

Solid Carbide Flame Shape SH




Application
*d : double cut
*s : single cut

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm
SH-41M	3	3	6.3	38
SH-53M	5	3	9.5	38
SH-2M	8	6	19	63
SH-5M	12.7	6	32	76
SH-6M	16	6	36	80
SH-7M	19	6	41	85

Solid Carbide Taper Shape V Radius End SL





Application
*d : double cut
*s : single cut
*nf : nonferrous

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm	Angle a
SL-41M	3	3	9.5	38	8X
SL-42M	3	3	12.7	38	8X
SL-53M	5	3	12.7	38	14X
SL-1M	6	6	16	50	14X
SL-2M	8	6	22	69	14X
SL-3M	9.5	6	27	74	14X
SL-4M	12.7	6	28	76	14X
SL-5M	16	6	30	77	14X
SL-7M	19	6	38	85	14X

Solid Carbide Cone Shape SM





Application
*d : double cut
*s : single cut

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm	Angle a
SM-41M	3	3	8.9	38	12X
SM-42M	3	3	11	38	14X
SM-43M	3	3	16	38	7X
SM-51M	6.3	3	12.7	53	22X
SM-53M	5	3	12.7	38	16X
SM-1M	6	6	12.7	50	22X
SM-2M	6	6	19	50	14X
SM-3M	6	6	25	50	10X
SM-4M	9.5	6	16	63	28X
SM-5M	12.7	6	22	69	28X
SM-6M	16	6	25	73	31X

Solid Carbide Inverted Cone Shape SN





Application
*d : double cut
*s : single cut

MODEL	Cutting Dia d1 mm	Shank Dia d2 mm	Length of Cut l2 mm	Overall Length l1 mm	Angle a
SN-41M	2.5	3	3	38	10X
SN-42M	3	3	4	38	10X
SN-51M	6.3	3	6	44	10X
SN-53M	5	3	6.3	38	10X
SN-1M	6	6	8	50	10X
SN-2M	9.5	6	9.5	53	13X
SN-4M	12.7	6	12.7	57	28X
SN-6M	16	6	19	63	18X
SN-7M	19	6	16	60	30X

50,000rpm ELECTRIC ROTARY








TR-500 CB(Control Box)

AC 110 V 60 Hz

AC 220 V 50 Hz

5A Fuse for 100 V, 2A Fuse for 220 V

Weight: 2.5 kg

W: 96 D: 207 H: 182

Non stage speed system and Liquid crystal surface version.

Strong torque at low speed with Hand / Foot speed control system.

Right & Left turning ability.

50,000 rpm high-powered brushless Handpiece with super-slim & light design.

Self-diagnosis error display, Work memory storage function.

Digital watch.

45,000rpm ELECTRIC ROTARY





Related Tools

TR-450 CB

AC 100 ~ 220V 50/60 Hz

Fuse: 3A

Weight: 1.8 kg

W: 130 L: 152 H: 103

Non stage speed system.

Hand / Foot speed control system.

Right & Left turning ability.

45,000 rpm high-powered carbon brush motor.

Remark: Collet Ø1.6/Ø2.34/Ø3.175 (option)

TR-450 HP
Non Load RPM: 45,000 Max Torque: 450 gf.cm

DIMENSION

Weight: 240g

L: 156.8

L1: 77.8

L2: 79

D: 26.8

D1: 19

35,000rpm ELECTRIC ROTARY





Related Tools

TR-350 CB

AC 100 ~ 220V 50/60 Hz

Fuse: 3A

Weight: 1.2 kg

W: 130 L: 150 H: 84

Non stage speed system (Well designed to output from zero to 35,000rpm by using non stage speed system).

Right & left turning ability.

Remark: Collet O1.6/O2.34/O3.175 (option)

TR-350 HP
Non Load RPM: 35,000 Max Torque: 300 gf.cm


DIMENSION

Weight: 232g

L: 159

L1: 74

L2: 85

D: 28.2

D1: 18.9

UL-80W
DUAL-FUNCTION POWERFUL
ULTRASONIC POLISHER









Application
The Miracle UL-80W Ultrasonic Polisher with powerful 45 watts of output and high micro vibration stroke frequency(40,000 times per second) which saving time to reach a quality result of polishing and finishing process.
The vibration of Miracle Ultrasonic Polisher is much lower than Air profiler therefore it suitable for polishing slots, ribs, corners, especially jewelry and electronic mold. This model included ultrasonic and rotary handset.

Power Input: AC110V AC230V

OSC Frequency: 25K Hz~40K Hz Auto Sweep

Power Output: 80W max

Output Power Range: 8W~45W

Size: 180 x 220 x 155 (W x L x H)

Power Supply Weight: 4.7 kgs ( 0.2 kgs)

UL-45W
DUAL-FUNCTION PRACTICAL
ULTRASONIC POLISHER






Application
The Miracle UL-45W Ultrasonic Polisher with powerful 45 watts of output and high micro vibration stroke frequency which saving time to reach a quality result of polishing and finishing process.
This model included ultrasonic and rotary handset.

Power Input: AC110V AC230V OSC Frequency: 25K Hz~40K Hz Auto Sweep Power Output: 45W max Output Power Range: 5W~35W Size: 150 x 180 x 140 (W x L x H) Power Supply Weight: 2.4 kgs ( 0.2 kgs)

UL-40W
SINGLE FUNCTION ULTRASONIC POLISHER






Aplication

The Miracle UL-40W Ultrasonic Polisher with powerful output and high micro vibration stroke.

With low vibration, it suitable for polishing jewelry and electronic mold.

Reasonable price, improve your factory working effective.

Power Input: AC110V AC230V

OSC Frequency: 25K Hz~40K Hz Auto Sweep

Power Output: 40W max

Output Power Range: 5W~35W

Size: 120 x 190 x 90 (W x L x H)

Power Supply Weight: 1.8 kgs ( 0.2 kgs)

APG-700 HIGH SPEED AIR GRINDING

● Speed	70,000rpm
● Weight	110g
● Collet	Ø3mm(Standard) Ø2.34mm(Standard)

Application
Related Tools






MIG-0302 HIGH TORQUE AIR GRINDER


Application
Related Tools
 

Speed	60,000rpm
Weight	110g
Collet	Ø3mm(Standard) Ø2.34mm(Option) Ø3.175mm(Option)

MIG-0303 HIGH TORQUE AIR GRINDER


 Application
Related Tools

Speed	60,000rpm
Weight	110g
Collet	Ø3mm(Standard) Ø2.34mm(Option) Ø3.175mm(Option)

MIA-120 DEGREE ANGLE AIR GRINDER



Application

Related Tools
ABP-CUP-060 (#60)
                ABP-CUP-100 (#100)
                ABP-CUP-150 (#150)

MIA-120-PLATE

ABN-O-060 (#60)
                ABN-O-100 (#100)
                ABN-O-150 (#150)
                ABN-O-240 (#240)
                ABN-O-320 (#320)
               ABN-O-400 (#400)
               ABN-O-600 (#600)

Speed	22,000rpm
Weight	110g
Stroke	M7

MIG-63SS / 63SS-X
HIGH TORQUE DUAL-COLLET
AIR GRINDER



 Application
Related Tools

Speed	35,000rpm
Weight	110g
Collet	Ø3mm(Standard) Ø6mm(Standard)

MIL-03 0.3mm
STROKE AIR PROFILER-LINEAR





 
Application
Related Tools
 

                                         

Speed	40,000rpm
Weight	190g
Stroke	0.3mm

MIL-07 0.7mm
STROKE AIR PROFILER-LINEAR




Application
Related Tools


 

Speed	35,000rpm
Weight	190g
Stroke	0.7mm

PT.HASTA MANDIRI SEPAKAT
Taman Sentosa Blok E1/8-8A cikarang Bekasi 17550
Jawa -Barat Indonesia
Contact         : Sartani
Phone           : 021-700-803-85
Mobile         : 08588-0363-214
Email           : sartani_r@yahoo.com